Fitting Rim Lock Outward Opening Door

The plate is cut into the door stop and the rim lock is set further back from the front edge of door.

Fitting rim lock outward opening door.

A rimlock is really a very simple lock for a gate or door so called because it sits on the rim edge of a gate or door. Fitting a rim lock to a door is quite straightforward but does need care in the measurement and cutting for a neat finish. Position the staple on the door frame. It is fitted to doors which open inward.

If the latch of the lock faces the wrong way for the opening direction of the door you will need to turn it round. The cylinder night latch can only be opened with a key from the outside but can be closed and locked from the inside using the locking button. These are not really the most secure as they are really a bit flimsy weak and not all that secure as in most cases if you could get enough leverage to pull the gate open then the lock bolt. Mortice locks deadlock sashlock latches rim cylinder locks.

You might consider removing the latchbolt from your rimlock and maybe fitting a tubular mortice latch to be operated by the same knob and spindle. There are 4 lever rimlocks used on some utilities cabins that are designed to be used on the inside of outward opening doors but i do not think they have a latch. Close the door and mark on the door frame the position of the top and bottom of the rim lock. The latch will then fall forwards out of the lock body 2.

The angled yale outward opening plate can also be used when also fitting any of the standard asec rim locks. Reverse angle strike available to. Commonly it is found on the inside of shed doors and on ledged and braced gates. A cylinder night latch of which the yale lock is the most common sort is an easily fitted lock that locks itself automatically when the door is closed.

Fitting a rim lock. It is an easy plate to fit. The staple which secures the lock catch and bolt when the door is closed may have an endplate like the lock which will need to be recessed in to the door frame in a similar manner as for the lock endplate. It would not be visually obtrusive.

Outward opening door lock at lockmonster co uk. At the side of the lock body is a small pin which you can push upwards with a narrow screwdriver 1.